1of 5 for more information on this and other products: contact sales at ortel 626-293-3400, or visit www.ortel.com. applications ? high performance supertrunking links ? high power distribution networks ? fiber deep architectures ? fttx networks features ? full function fiber optic amplifier ready for integration ? output power range +30 to +35 dbm ? input power range: ?10 dbm to +12 dbm ? low noise figure < 6 db ? complete solution wi th input and output monitors ? remote interface for fu ll control of unit rs- 232 (rs-485 or i 2 c optional) ? 2 outputs are available ? polarization mode dispersion <0.5 ps ? polarization dependant gain < 0.1 db ? input / output isolation > 40/40 db ? low electrical power consumption the ortel mafa 3000 series fiber optical amplifier gain block is an ideal building block for oem system integrators. the family of mafa 3000 optical amplifiers is designed to meet the most demanding noise performance requirements of catv and fttx applications, and performs all the functions required of an optical amplifier for system integration. mafa 3000 series optical amplifiers provide optical isolation on the input and output of the gain block for stable, low noise operation. the input and output optical signal power levels are detected for monitoring and control. the input optical signal is amplified with active gain control for a constant output power level, or with active output power control for constant gain mode. the mafa 3000 series optical amplifiers also provide monitors and associated alarms for all vital characteristics. the optical output of the mafa 3000 series optical amplifiers can be split into number of ports by an optional internal splitter. mafa 3000 series erbium doped fiber amplifier
data sheet | july 1, 2004 2of 5 ortel, a division of emcore 2015 west chestnut street a lhambra, california 91803-1542 tel: 626-293-3400 fax: 626-293-3428 www.emcore.com copyright 2003. emcore corporation mafa3000 series high powe r edfa gain block revision a specifications property unit limit mafa models comment product code 3030 3032 3035 performance (note 1) operating input power pin (dbm) max +12 +12 +12 operating input power pin (dbm) min -10 -10 -10 output power po (dbm) 30.0 32.0 35.0 nominal (note 2) noise figure nf (db) typ/max 5.5/6.0 5.5/6.0 5.5/6.0 (note 3) static gain flatness gf (db) max +/-1.0 +/-1.0 +/-1.0 (note 4) dynamic gain flatness (db) max +/ -2.00 +/-2.25 +/-2.50 (note 5) output power stability (db) max +/- 0.25 +/- 0.25 +/- 0.25 (note 6) power consumption (steady state regime) psys (w) max 50 30 65 40 80 50 70 o c case (premium) 55 o c case (economy) (note7) remnant pump power to output prp (dbm) nom. <-30 <-30 <-30 notes: 1) unless stated otherwise all specific ations apply over the full temperature range and humidity 2) depending on the fiber optic patchcord interface t he measured value can vary up to 0.5 db less than the actual val ue. 3) measured @ 25 c, pin = 0 dbm 4) measured with a swept probe signal (pp), where pp = 0 dbm @ 25 c 5) measured with a swept probe signal (pp), and a fixed tone signal (pt) @ 1553nm; (pt = pp+20 db; pt + pp = 0 dbm) @ 25 c; 6) stability over polarization and temperature 7) premium version ? mafa with cooled, telcordia qualified pumps economy ve rsion ? mafa with uncooled pumps physical general property requirement comments operating wavelength 1545 ~ 1562nm standard operating case temperature -40c to 70c or 0c to 55c premium economy storage temperature -40 c to 85 c standard operating humidity 20% to 85% non-condensing voltage supply range +4.5v to+5.5vdc or +23v to + 25v +5 v version +24 v version optical connectors see ordering information user specified dimensions in inches 9.5?w x 6.7??d x1.5?h mafa 3030 to mafa 3035 unit height depends on heatsink used, airflow and other requirements of end user?s system
3of 5 ortel, a division of emcore 2015 west chestnut street a lhambra, california 91803-1542 tel: 626-293-3400 fax: 626-293-3428 www.emcore.com copyright 2003. emcore corporation data sheet | july 1, 2005 mafa3000 series high powe r edfa gain block revision a block diagram: cladding pump technology cladding pump technology uses erbium/ytterbium fiber optic assemblies (double clad fiber and multi-mode pump lasers) to produce cost effect ive high power optical amplification. this technology enables the development of higher power edfas-someth ing that was cost inhibitor when using standard erbium fi ber and single mode pumps. sample fttx architecture ont edfa 20 outputs of 20 dbm wdm rf olt homes businesses multi dwelling units splitter ont video 1490nm 1310nm 1550nm 20 km 1550nm tx -voice -data -video data voice splitter splitter splitter ont ont ont ont ont ont ont ont ont ont ont ont edfa 20 outputs of 20 dbm wdm rf olt homes businesses multi dwelling units splitter ont ont video video 1490nm 1310nm 1550nm 20 km 1550nm tx -voice -data -video data data voice voice splitter splitter splitter ont ont ont ont ont ont ont ont ont ont ont ont ont ont ont ont ont ont ont ont 980 nm pump output monitor input monitor multi-mode pumps drive electronics er er/yb assembly input hybrid filter / isolator isolator 1% tap 980 nm pump output monitor input monitor multi-mode pumps drive electronics er er/yb assembly input hybrid filter / isolator isolator 1% tap
4of 5 ortel, a division of emcore 2015 west chestnut street a lhambra, california 91803-1542 tel: 626-293-3400 fax: 626-293-3428 www.emcore.com copyright 2003. emcore corporation data sheet | july 1, 2005 mafa3000 series high powe r edfa gain block revision a form factor
5of 5 ortel, a division of emcore 2015 west chestnut street a lhambra, california 91803-1542 tel: 626-293-3400 fax: 626-293-3428 www.emcore.com copyright 2003. emcore corporation data sheet | july 1, 2005 mafa3000 series high powe r edfa gain block revision a ordering information mafa30 - - - - class : premium: utilizes cooled pump lasers economy: utilizes un cooled pump lasers qualifications fcc: subpart b. part 15, cla ss ?a? unintentional radiators ce: en50083-2, 19995 with amendment 1, which incorporates en 55013 radiated and conducted emissions en 61000-4-3 radiated immunity en 55020 conducted immunity en 61000-3-2 harmonics all components meet telc ordia gr-1312 and gr-486 stan dards (except pumps in economy class). en 61000-3-2 harmonics fit rate: ? 90% level of confidence < 2000 @ 30 c premium mafa 3035 ? 90% level of confidence < 3500 @ 30 c economy mafa 3035 power level connector option # of output ports class voltage supply 30 ? 30 dbm sc - sc/apc 1 ? 1 port p ? premium 1 ? + 5 v 32 ? 32 dbm fc - fc/apc 2 ? 2 ports e ? economy 2 ? + 24 v 35 ? 35 dbm ec - e2000/apc tc - sc/upc gc - fc/upc
|
